Stucco & Drywall Removal in Culver City, CA
Licensed demolition contractor serving Culver City and all of Los Angeles County. Fast turnaround, fully insured, free estimates.
Professional Stucco & Drywall Removal in Culver City, CA
Stucco and drywall removal is common in renovation, mold remediation, and seismic retrofit projects across Southern California, where the combination of aging plaster-and-lath walls, multi-coat stucco exteriors, and years of deferred maintenance creates significant work for demo contractors. Interior drywall removal for a remodel is straightforward — but in older homes, that drywall may have been layered over original plaster and lath, requiring significantly more labor to expose the framing. Exterior stucco removal is a different challenge entirely: multiple coats of stucco over wire lath and building paper, with the outermost coat frequently containing silica dust and potentially asbestos-containing textured finishes in pre-1980 construction.
Mold remediation projects add an important layer of complexity. When stucco or drywall is being removed due to moisture intrusion, the scope must be carefully defined so that affected material is fully removed to unaffected substrate without spreading mold-contaminated dust to clean areas of the building. C&S uses containment barriers, negative air pressure, and proper PPE protocols on mold-related demo to meet California regulatory requirements and protect indoor air quality during and after the project.
Cost drivers include square footage, number of material layers, whether the removal is interior or exterior (exterior stucco removal is significantly more labor-intensive), the presence of hazardous materials requiring certified abatement, and mold containment requirements if applicable. Projects run $600–$3,500 and most complete the same day for interior scopes, with exterior stucco taking longer depending on area. C&S delivers a clean, exposed framing assembly ready for inspection, new insulation, and re-sheathing.
What's included in our stucco & drywall removal:
- ✓Interior drywall and plaster-and-lath removal
- ✓Exterior multi-coat stucco teardown
- ✓Asbestos testing for pre-1980 textured surfaces
- ✓Mold containment and negative air pressure protocols
- ✓Full debris hauling and disposal
- ✓Clean framing exposure ready for inspection
Stucco & Drywall Removal in Culver City: Local Knowledge
Culver City's identity as a tech and entertainment hub has driven rapid commercial development, and interior tenant improvement demolition is one of the most consistent services we provide in the city's office buildings and creative campuses along the Jefferson Boulevard corridor and in the Helms Bakery District. When an existing tenant leaves or a landlord resets a commercial space, that typically means stripping back to raw shell — a project type where C&S Demolition's licensed, insured crews and Culver City Planning & Development (310) 253-5700 permit coordination make a meaningful difference in speed and compliance.
Beyond commercial interiors, the Fox Hills neighborhood and residential streets throughout Culver City have older housing that occasionally requires full teardowns or selective structural demolition for significant remodels. Historic neighborhoods near Downtown Culver City may require a design review step for exterior work, and we build that timeline into the project plan from day one. C&S Demolition serves all of Culver City for residential teardowns, garage and ADU demo, concrete and foundation removal, commercial interior demolition, and structural work. Call (562) 204-6335 to request an estimate.
Stucco & Drywall Removal Services Across Culver City Neighborhoods
C&S Demolition serves every neighborhood in Culver City, including Downtown Culver City, Helms Bakery District, Jefferson Blvd Corridor, Fox Hills. No matter where your property is located, we dispatch crews fast and handle every step from permit filing to final cleanup.
Culver City Demolition Permit Information
Stucco & Drywall Removal in Culver City typically requires a demolition permit issued by the city building department. C&S Demolition handles the entire permitting process on your behalf — from application to final inspection sign-off.
Stucco & Drywall Removal Cost in Culver City
Typical Range
$600 – $3,500
Typical Duration
Same day - 1 day
Pricing in Culver City depends on square footage, materials, access, permit fees, and disposal costs. The best way to get an accurate number is a free on-site estimate — we'll come to you.
Why Culver City Homeowners Choose C&S Demolition
Licensed & Insured
California-licensed contractor operating as C&S Demolition / Scrapit LLC. Fully covered for every job in Culver City.
Local Knowledge
We know Los Angeles County permit offices, inspectors, and local ordinances. No surprises.
All-Inclusive Pricing
Demolition, haul-away, and site cleanup are all included. No hidden fees or surprise charges.
Fast Turnaround
Most projects in Culver City are completed within Same day - 1 day. We work around your schedule.
DBA of Scrapit LLC
Backed by the full resources of Scrapit LLC — equipment, crews, and experience on thousands of SoCal projects.
Free On-Site Estimates
We come to your Culver City property, assess the project in person, and give you a written quote the same day.
How Stucco & Drywall Removal Works in Culver City
From first call to final inspection — here's exactly what to expect when you hire C&S Demolition for stucco & drywall removal in Culver City.
Free On-Site Estimate
We visit your Culver City property, measure the project, check for hazardous materials (asbestos, lead paint), and provide a written estimate the same day — no obligation. We quote lump-sum only: no hourly billing surprises.
Permit Filing — Culver City Planning & Development
Stucco & Drywall Removal in Culver City typically requires a demolition permit. We handle the complete application process with Culver City Planning & Development ((310) 253-5700) — you never deal with city paperwork directly. Permit timelines are built into your project schedule from day one.
Site Preparation and Utility Disconnect
Before demolition begins, we verify all utilities to the work area are properly capped or disconnected. Our crew sets up dust control barriers, secures the perimeter, and protects adjacent structures. California code requires verified utility disconnections before a demo permit is released — we coordinate this entirely.
Stucco & Drywall Removal in Culver City
Our Culver City crew performs the stucco & drywall removal efficiently using the right equipment — from precision hand tools for selective work to heavy machinery for larger teardowns. Debris is loaded directly into our trucks as we work. Most stucco & drywall removal projects in Culver City are completed in Same day - 1 day.
Debris Removal, Cleanup, and Permit Closeout
All debris is hauled to licensed facilities in Southern California. We sort recyclable concrete, metal, and clean wood from general waste to minimize landfill impact. We then prepare the site for final inspection, coordinate with Culver City Planning & Development, and ensure your permit is officially closed — leaving your property broom-clean and ready for the next phase.
Ready to Start Your Stucco & Drywall Removal Project in Culver City?
Get a free, no-obligation estimate from C&S Demolition. We serve Culver City and all surrounding areas. Fast response, licensed & insured.
Frequently Asked Questions — Stucco & Drywall Removal in Culver City
How much does stucco & drywall removal cost in Culver City?+
In Culver City and the surrounding Los Angeles County area, stucco & drywall removal typically costs between $600 and $3,500 depending on scope, access, and materials. Contact us for a free on-site estimate tailored to your specific project.
Do I need a permit for stucco & drywall removal in Culver City?+
Permit requirements vary by project type and Culver City municipal code. C&S Demolition handles all permit research and filing on your behalf, so you never have to deal with the city directly. We're familiar with Los Angeles County regulations and have existing relationships with local building departments.
How long does stucco & drywall removal take in Culver City?+
Most stucco & drywall removal projects in Culver City are completed in Same day - 1 day. Timeline depends on project size, permit requirements, and access to the site. We'll give you a firm schedule before any work begins.
Is C&S Demolition licensed and insured in California?+
Yes. C&S Demolition is a DBA of Scrapit LLC, a fully licensed California contractor. We carry general liability insurance and workers' compensation coverage on every project in Culver City and throughout Los Angeles County.
Do you haul away debris after stucco & drywall removal in Culver City?+
Absolutely. Full debris removal and site cleanup is included in every C&S Demolition project. We haul everything away and leave your Culver City property broom-clean and ready for the next phase of your project.
Serving Culver City and Nearby Areas
Our Culver City demolition crews also serve the surrounding communities of Los Angeles, Inglewood, Santa Monica, and throughout Los Angeles County. If you're not sure whether we cover your area, just call — we likely do.
Related Guides & Resources
Learn more about stucco & drywall removal costs, permits, and processes in Southern California:
Stucco & Drywall Removal Cost in Southern California
Stucco and drywall removal costs $600–$3,500 in Southern California. Common for remodels, mold remediation, and re-siding projects.
Cost GuidesCarport Removal Cost in Southern California (2026)
Carport removal in Southern California costs $800–$3,500 for most projects. Metal frame carports are quickest; attached wood structures take longer.
Cost GuidesTile Removal Cost Guide for Southern California Homeowners
Tile removal in Southern California costs $1–$4 per square foot depending on tile type, adhesive, and subfloor condition. Here's the full breakdown.
More Demolition Services in Culver City
C&S Demolition handles all types of demolition in Culver City. Explore our other services: